Universal

New complete replacement Rhino Wingshaft with clutch. Complete replacement components from original will not interchange. C-to-C length: 63� (1600 mm)End yoke: 1-3/4 20 spline, Clutch: 1-3/4� 20 Spline. Fits Rhino Rotary Cutters.•  Complete...

One New Aftermarket Replacement Complete Constant Velocity Tractor Half Shaft made to fit the following models and machines:•  Alamo Rotary Cutters: A141V, A201V•  Rhino Rotary Cutters: FL10M (S/N 10001>), FL14 (S/N 10341-10699),...

Complete driveline with quick disconnect yokes. This is a complete replacement. Components from your original driveline will not interchange. Driveline is a 100 series, size 4 driveline. Rated as a category 3 (35 hp). Minimum C-to-C length: 41" (1035...

Universal 40,000 Volt 12 Volt-3.0 Ohms Ignitor Coil • Fits existing brackets. High performance heavy duty coil for 12 volt systems. Delivers up to 40,000 volts. Epoxy filled for better cooling & voltage insulation. Enables larger gap for...

2700 Series Metric PTO Cross & Bearing Kit, (U-Joint) Replacement cross & bearing kit (universal joint) for a series 2700 metric PTO shaft.Typical uses for this series PTO include Post Hole Digger PTO's, Hay Tedder PTO's, Finish Mower PTO's,...

New 100 Series Economy Driveline, size 4. Driveline rated as a category 3 (35 hp).Driveline has 5 ft. lift / 3-pt hitch. Minimum C-to-C length: 28" (710 mm), Maximum C-to-C length: 41" (1060 mm), Total collapsed length: 36" (915 mm). Tractor end: 1-3/8"...

New 100 Series Economy Driveline, size 4. Driveline rated as a category 3 (35 hp). Driveline has 5 ft. lift / 3-pt hitch. Minimum C-to-C length: 28" (710 mm), Maximum C-to-C length: 41" (1060 mm), Total collapsed length: 36" (915 mm).Tractor end: 1-3/8"...

Disc mower driveline with quick disconnect yokes, size 5. Driveline rated as a category 4 (47 hp @ 540 rpm), 100 series. Driveline C-to-C length: 25" (635 mm), Max C-to-C length: 35" (900 mm), Total collapsed length: 33" (850 mm). Tractor end: 1-3/8" 6...

Hay tedder driveline with RP3 clutch, size 4. 100 Series, category 3 (35 hp), size 4. Minimum C-to-C length: 55" (1400 mm), Maximum C-to-C length: 82" (2080 mm), Total collapsed length: 66" (1675 mm). Tractor end: 1-3/8" 6 spline yoke, Implement end:...

Complete driveline with quick disconnect yokes. Minimum C-to C Length: 48" (1210 mm), Maximum C-to-C Length: 74" (1880 mm), Total collapsed length: 58" (1462 mm). Tractor end: 1-3/8" 6 Spline, Implement end: 1-3/8" 6 Spline. Lemon style tubing, type A...

This brand new 1000 watt tank heater kit is thermostatically controlled, has a 5/8" tank port size, a capacity of 16-25 quarts, and 120 / 8.3 volts / amps. This tank heater fits many brands and models (see below). (NOTE: replaces GE1000, 12100,...

New 600 watt lower radiator hose heater has a 1.25" hose fitting and has a die cast aluminum body and heavy duty 3 wire cord. (NOTE: Do not install on diesel engines without by-pass in water pump.) •  Do not install on diesel engine w/o...

New 600 watt lower radiator hose heater has a 1.5" hose fitting and has a die cast aluminum body and heavy duty 3 wire cord. (NOTE: Do not install on diesel engines without by-pass in water pump.) •  Do not install on diesel engine w/o by-pass...

This brand new 1500 watt tank heater kit is thermostatically controlled, has a capacity of 26-40 quarts, and 120 / 12.5 volts / amps. This tank heater fits many brands and models (see below). (NOTE: replaces GE1500, 12150, 4935-64435) • ...

New 600 watt lower radiator hose heater has a 1.75" hose fitting and has a die cast aluminum body and heavy duty 3 wire cord. (NOTE: Do not install on diesel engines without by-pass in water pump.) •  Do not install on diesel engine w/o...

New 600 watt lower radiator hose heater has a 2" hose fitting and has a die cast aluminum body and heavy duty 3 wire cord. (NOTE: Do not install on diesel engines without by-pass in water pump.) •  Do not install on diesel engine w/o by-pass...

Universal Replacement for 400 Watt (3 Terminal) Cord New 2 terminal, 400 watt, 6' replacement cord for the 5B360 plug heater. (NOTE: replaces 28216)• Replacement cord for 5B360 plug heater. Compatible with: Allis-Chalmers INDUSTRIAL/CONSTRUCTION:...

New 400 watt engine block frost plug heater has a .75" diameter plug. •  For 2 cylinder John Deere Tractors. (3/4" Plug is located in bottom of cylinder head, remove Plug.Dim A (1)       400 Watt Compatible...

New 600 Watt Engine Block Frost Plug Heater has a forged brass body with a 1.5" diameter plug and positive locking assembly. It uses an O-ring seal and is rated for long life.Dim A (1)       600 WattDim B...

New 600 Watt Engine Block Frost Plug Heater has a forged brass body with a 1.625" diameter plug and positive locking assembly. It uses an O-ring seal and is rated for long life.Dim A (1)       600 WattDim B...